Custom Pool Builder in Conroe, TX

Houston Cool Pools has been designing and constructing gunite swimming pools across the greater Houston area since 1996. Every project starts with a blank sheet - not a catalog - so the pool that ends up in your backyard fits your lot, your budget, and the way you actually plan to use it. In Conroe, that work is custom pool building for a specific yard in Montgomery County, not a city name pasted onto a stock plan. Conroe sits at the northern edge of our regular service area, and lakeside and acreage lots there often call for bigger gunite footprints.

A custom gunite pool build is a real construction project, not a drop-in installation. Ours typically starts with a free in-home design consultation where we look at drainage, sun exposure, sightlines from the house, and any easements or setbacks that affect what's possible. From there we render a 2D plan and, where useful, a 3D concept so you can see the pool before we break ground. Excavation, steel, plumbing, gunite shell, tile and coping, decking, and interior finish each run as scheduled phases with dedicated crews. Because gunite is site-built, the shape and depth aren't limited by a mold - you can tailor beach entries, sun shelves, spa spillovers, raised bond beams, custom step layouts, and integrated water features. Every build is permitted through the appropriate jurisdiction and inspected at the milestones your municipality requires.

A custom pool builder starts from the lot. There is no shape book. The first drawing is a response to your yard, the way you entertain, and the budget range you actually want to be in. Cocktail depth, a lap lane, a spa, and a full family pool are different drawings, and pretending they are trim levels of one product is how people end up with a pool they do not use.

Homeowners searching “pool builders houston,” “pool contractors,” and “custom pools houston” are usually comparing process. Ask who employs the crew that ties steel and who sprays gunite. Ask when you will see a site plan. Ask which city or county pulls the permit for your address. A polished gallery does not answer those questions. The proposal should.

We have been building gunite pools across this metro since 1996. The office is on Highway 249 in northwest Houston, and the same sequence is used in the suburbs and inside the loop. The yard changes. The standard does not.

Hiring a pool builder in Houston is a construction decision, not a catalog order. The companies that show up for “pool contractor,” “swimming pool construction,” and “custom pool builder” are not all selling the same thing. Some install a fiberglass shell that arrives on a truck. Some sell a package shape. Houston Cool Pools designs and builds gunite: a steel cage, then a concrete shell sprayed on your lot, then tile, coping, deck, and an interior finish. The shape is whatever the drawing says, because there is no mold.

Fiberglass is a legitimate product. It is also a different product. The shell is manufactured off-site, so the widths, depths, and steps are the ones the mold allows. Gunite is the method behind the custom pools people are usually picturing when they search for a pool builder in Houston: a beach entry on one side, a spa on the other, a sun shelf where the shade actually falls, a raised bond beam if the house sits above the yard. If a salesperson cannot explain which method they build, you do not have a proposal yet.

The design visit is where most of the expensive mistakes are avoided. We look at where water already sits after a storm, where the afternoon sun lands, what you see from the kitchen and the primary bedroom, and whether a fence, a tree, or an easement cuts the usable yard. Equipment has to reach the hole. On a wide suburban lot that is simple. On a fenced inner-loop lot it can decide the shape before the finish does. Bring the survey if you have one, and the HOA architectural rules if the neighborhood has them. We would rather read the rule before we draw than redraw after a committee.

A gunite build follows a sequence, and skipping a step is how pools fail later. Layout and excavation come first. The hole is cut larger than the finished water so the steel and the shell have room. Rebar is tied to the engineered spacing. Plumbing is stubbed and pressure-tested while it can still be seen. Gunite is then sprayed so the steel sits inside the shell, not against one face of it. The shell cures before tile, coping, and deck go on. The interior finish — plaster, quartz aggregate, or pebble — is a wear surface over that structure, not the structure itself. Startup is a separate appointment: the equipment is run, the chemistry is set, and someone walks you through the pump, filter, heater, and light. Video is fine. There is a lot of it.

Greater Houston is not a gentle site. A lot of the metro sits on clay that shrinks when it dries and swells when it rains. The shell is built for that. The deck is not glued rigidly to the coping; a joint there is what keeps the first dry summer from telegraphing a crack across the walking surface. Drainage has to leave the bond beam and the equipment pad. A pool that holds storm water against the shell is a maintenance problem you will notice every June.

Permits follow the address, not the marketing map. A house inside the City of Houston is not reviewed by the same desk as a house in unincorporated Harris County, and Montgomery, Fort Bend, Waller, Brazoria, Galveston, and Chambers counties each have their own path. We confirm the jurisdiction before drawings are submitted and we schedule the inspections that jurisdiction requires. You should not be the person standing in the yard wondering which inspector is coming.

Schedule for a custom gunite pool is generally 8 to 16 weeks from the day we break ground to the first swim. Weather, inspection timing, and the number of features move that window. An attached spa, a vanishing edge, or a difficult access path adds time. A straight rectangle on an open lot does not. We give you the sequence before we dig, and the backyard should not go quiet without you knowing which trade is next.

Houston Cool Pools publishes new-pool project ranges at $65k–$90k, $90k–$115k, $115k–$150k, and $150k and up. Those are ranges of finished projects, not a bid for your yard.

What moves a new gunite pool from one range to the next is concrete: water-surface size, whether there is an attached spa, the deck material, the interior finish, and how hard it is to get equipment into the backyard.

A remodel, a resurface, a deck replacement, or an equipment change is priced from the existing pool, not from those new-build ranges. If the shell has to be cut and new gunite tied in, the job starts to look like construction again and the schedule changes with it.

Financing is available for qualified homeowners. A monthly payment is not a reason to skip the design conversation. The number only means something after the drawing shows the size, the depth, and the deck. Our office is at 21902 Highway 249, Houston, TX 77070. The phone on this website is (281) 645-6631.

Conroe (North of The Woodlands, along I-45) is one of the places we build. The notes below are the site conditions that change custom pool building here. They are not a slogan with the city swapped in.

Conroe is the north end of a normal drive for us, in Montgomery County, with a mix of lake-adjacent lots and ordinary subdivision yards. Bigger footprints show up on acreage. They still need a permit path and a way for trucks to reach the back.

Lake proximity is not a reason to aim an infinity edge at a view you do not have. If the water or the tree line is actually in the sightline, we will design for it. If it is not, we will not sell the edge.